Voron 0/0.1 Magnetic Backplate

prusaprinters

Just a light modification for the Voron0/0.1, you don't need to add M3 nuts in the progress, but a quick note: I don't use the spool holder, so I can't ensure that this will work with. Besides that it only works with 2.5mm backplates, so if you have a ≥3mm plate write in the comments what you need or modify the included .step-files by yourself.I got all the basic models from here: https://github.com/VoronDesign/Voron-0You will need the following for the magnetic backplate:12x 6x2mm (or smaller than 2mm) magnets8x M3x6mm BHCSthin double sided adhesive-tapeAssembly is just as easy as it looks, just press the magnets (mark the polarity on the magnets) in the fitting holes, screw the frame-parts on the frame and put the other parts with the adhesive-tape.Another note: If you print with ABS/ASA I might consider to scale the model to 101/102% in your slicer, because of shrinking, otherwise the magnets couldn't fit, the holes are designed to have a flush fit (6x2mm, like the magnets). Mind the location of the magnets, they're always point away/are on the outer part of the frame. If you have any suggestions, feel free to comment.