Voltron: Legendary Defender Bayard

thingiverse

This is a bayard from the Netflix show Voltron: Legendary Defender. There are three different ways to print this: 1. In One Piece: Good if you intend to paint it. It has been split in several different ways, depending on the size of your printer: * `onepiece.stl`: The entire bayard as one piece * `onepiece_half.stf`: Cut in half so it has a perfectly flat surface for the print bed. Print two identical copies. This is how I did mine. * `onepiece_quarter_right.stl` and `onepiece_quarter_left.stl`: Cut into quarters. These two are mirror images of each other, so print two of each. 2. With Details Separate: The intention is that each piece can be finished separately, then attached together, so there are no paint seams. The details were exported with a 0.2mm gap between the insides of the detail pieces and the main body of the bayard. * `separate_body.stl`: Main body of the bayard, with no details * `separate_DetailTop.stl`: Top details. Print two identical copies. * `separate_DetailBottom.stl`: Bottom details. Print two identical copies. 3. With a Multicolor or Multimaterial Printer: This version is similar to the "separate details" version, with a few important differences: There is no 0.2mm gap between the parts, and an additional part has been separated for the colored part of the bayard (the red/blue/yellow/green/black part). Finally, a left and right version of each part has been exported. * `multicolor_body.stl`: Main body of the bayard, with no details * `multicolor_DetailTop_left.stl` and `multicolor_DetailTop_right.stl`: Top details. * `multicolor_DetailBottom_left.stl` and `multicolor_DetailBottom_right.stl`: Bottom details. * `multicolor_color_left.stl` and `multicolor_color_right.stl`: The colored part on top. ### A Few Important Notes: * I have only tested the `onepiece_half.stl` version, so I cannot vouch for any of the other versions. If you try them, please post information to help others! * If your printer only supports two colors/materials, then you should be able to print `multicolor_body.stl`, `multicolor_color_left.stl`, and `multicolor_color_right.stl` as one piece with two colors, then print `separate_DetailTop.stl` and `separate_DetailBottom.stl` separately and attach them.