Voltage Converter (24V→5V) Enclosure for Creality Printers_Cr-10, Ender-3

thingiverse

This is the housing for the Voltage Converter that converts 24V coming from the PSU of Creality Printers to 5V required for many accessories like Raspberry Pi, Led Light etc. This housing accommodates a 5V DC Fan which is necessary for proper cooling of the Voltage Converter itself. The 5V DC Fan is connected by soldering its two wires to +5V/GND terminals of the Voltage Converter Unit. Voltage Converter Unit, VCU Link: http://s.aliexpress.com/3emA3YRB 5V DC Fan Link: http://s.aliexpress.com/nY7rIn6V An XT60 Female connector is required to connect it to the PSU of Printer. 14AWG silicon wire is recommended for wiring connection. XT60 Female connector Link: http://s.aliexpress.com/m2ieauiq 14AWG wire link: http://s.aliexpress.com/e6ZNrMbQ One 1Female→2Male XT60 converter is required to split power from PSU to CPU and Voltage Converter Unit. 1Female→2Male XT60 Converter Link: http://s.aliexpress.com/36JraERr IF YOU DON'T HAVE XT60 CONNECTORS, VCU CAN BE DIRECTLY CONNECTED TO 24V OUTPUT TERMINAL OF PSU. Two X M3 screws X 7-8mm are required for mounting VCU to Housing. Two X M3 screws X 16-20mm are required for mounting 5V Fan to Housing. Plus, it can be mounted to Aluminium extrusion frame of Creality Printers if you want. Before Using always check voltage coming from the Voltage Converter, it should be around 5V else it can damage accessories. My Youtube Channel: https://www.youtube.com/watch?v=g5fV4R_XKxM&t=8s