Vog-25 and 25P APS C02 Smart Shotgun Shell Adapter for Airsoft Gp-25

thingiverse

As the Name suggests, this is a vog-25 style adapter that accepts APS C02 smart shotgun shells so that they may be used in the airsoft double bell/dboys gp-25 grenade launcher. Here is a video showing a firing demonstration as well as how to use the APS C02 Shells with the vog adapter. https://www.youtube.com/watch?v=fipTyCxTEX4 If you prefer to read rather than watch, the important details from the video are below REQUIRED MATERIALS In order for the firing pin in the gp-25 to reach the APS C02 shotgun shell, you will need 2 1.5mm tall, 4-4.75mm wide neodymium magnets (1.5mmx4mm or 3/16”x 1/16”) Alternatively you could use one 3mm tall, 4mm wide magnet, as long as the magnet/magnets have a total height of 3mm and a width of 4.75mm or lower they will work. They can be purchased here: https://www.kjmagnetics.com/proddetail.asp?prod=D31-N52 https://totalelement.com/products/3-16-x-1-16-inch-neodymium-rare-earth-disc-magnets-n48-150-pack https://www.ebay.com/itm/264889878621 Alternate Magnet (Only requires 1 magnet per APS shell) https://www.apexmagnets.com/magnets/4mm-x-3mm-disc-neodymium-magnet https://www.kjmagnetics.com/proddetail.asp?prod=D32-N52 HOW TO USE THE VOGS Gas and Load your APS shell and then insert it into the back of the launcher until it's fully seated. The rim of the bottom of the vog adapter should be slightly taller than the base of the APS C02 smart shell. Take 2 1.5mmx4mm neodymium magnets and attach them to the release button on the base of the APS C02 smart shell. Insert the Vog-25 APS C02 shell adapter into the gp-25 like the shell that comes with it and pull the trigger to fire. Shell can be released from the launcher with the release button. HOW TO UNLOAD THE VOGS Use the included “APS Smart Shell Ramrod” file to remove the shotgun shells. Simply insert this into the muzzle end of the vog adapters and push until the APS C02 smart shell pops out of the base of the Vog-25. To remove the magnets from the APS C02 smart shell for refilling and reuse, simply take a larger stack of magnets and attach it to the stack of 2 on the APS smart shell release button. The magnetic force should be strong enough to overcome the two attached to the APS C02 smart shell and they should be able to be removed with a quick yank.