VKB Stick to Omnithrottle Adapter - for 100mm Extension

thingiverse

The other 2 designs rely on you using the 200mm Extension, where you can disassemble the top part too. (where the joystick connects). But that is not possible with the 100mm part, as it's one whole stick of metal all down to the base. With this mod, you can use the 100mm Extension. - unscrew the 2 screws on the 100mm Extension and keep them - disconnect the wiring in the Extension - put the lower disassembled part from the Extension and mount it to the adapter using one of the screws - put the upper part of the Extension in Adapter - use a ~15mm M6 Screw and a Nut to fix the upper part from rotation inside the adapter (when using the z rotation of the joystick). This may take some patience ...... I hotglued the Nut on a small stick, to maneuver it in the Extension. Then screwed the screw from outside. - lengthen the cables by soldering, and connect the cabled - optionally put the "lid" on and put in the seconds screw