Vive Controller Stand and Charging Station - Extended for USB Plug

thingiverse

I modified the base to be slightly smaller, which helped conserve materials and allowed me to increase its height to accommodate the shipped USB plugs. This adjustment was necessary because my previous experiences with other models showed that their USB cables were excessively long, putting unnecessary strain on the charging port. I envisioned a worst-case scenario where the charging port could break off under the weight of the controller, leading to a potentially disastrous situation. By redistributing the weight to the plastic body of the controller, I ensured a safer and more reliable design. Additionally, I simplified the front of the design to streamline its appearance. I opted for the following print settings: * Infill percentage: 30% * Layer height: 0.15mm * Shell thickness: 0.8mm * Bottom/top thickness: 0.8mm * Printing speed: 60 * Support type: Everywhere * Platform adhesion: Brim