Virpil CM3 Throttle Base to Volair Sim Mount Converter

thingiverse

Print one of each. The longer one goes closer to the front of the throttle. Use images for reference. Average print time is 3 hours. # Materials 4 x M5x15 round head 4 x M5x20 hex head, with nuts Optional: 8 x M5 washers # Put It Together 1. Put hex bolts in hex holes of the 3D print. 2. Put round bolts in round holes of the 3D print. 3. Attach longer 3D piece (the 40) to the forward mount point of the base using the round head bolts. The hex bolt area should be facing aft. 4. Attach shorter 3D piece (the 30) to the aft mount point of the base using the round head bolts. The hex bolt area should be facing aft. 5. The CM3 should now have both the 30 and 40 pieces securely attached to the base. Put the CM3 onto the Volair Sim throttle plate, aligning the hex bolts to the matching holes. 6. Secure the hex bolts with nuts to the Volair Sim throttle plate. 7. Done!