Vintage Ornate Knob

prusaprinters

Modeled a old brass knob to have a pair for a drawer. (Cover photo printed in HobbyKing Copper Glitter PLA)Print Settings (as set in "Ornate Knob Threaded M4.3mf"):0.1mm Detail (used 0.25 Nozzle)20% InfillNo Supports NeededAvoid Crossing PerimetersSeam position Rear (and paint seam in threaded area to be a line, makes it easier to screw in)Skirt height 1 layerBrim width 6mmBrim separation gap 0mm(I used a large brim so that the knob wouldn't come off the build plate.)You may need to change your retraction settings so you don't get a lot of stringing as gcode has my retracting settings as is mainly there just for a time estimate for a high quality print.Modeling Suggestions:I made the knob to fit a M4 bolt but included a 3mf that has no threads to add your own. I would recommend adding a negative offset to your threads so that's it not a super tight fit.