Vidroc 360: Samsung Gear VR Edition

thingiverse

Vidroc 360: Samsung Gear 360 Edition. 1.30.19 - Added 54mm Adapter (and one with fins, naturally) 38mm and BT50 adapters available The camera securely snaps into place - no retaining screw required unless you need to recover your booster with the camera installed; then you can drill out the base and run an eye-bolt up to the camera's threaded base. For those who don't want the cute forward fins, adapters without them are available. A chamber below the camera allows for the addition of a PerfectFlite Firefly. The camera clip features a 2mm hole through the top for attaching parachute lines and includes a notch in its shoulder to prevent line binding on the airframe. Use a plastic zip tie to secure the clip to the camera. To activate the camera, simply roll the clip to the side to access the buttons. More body tube adapters will be added as progress is made. Note: If you have a body tube for which you'd like a mount, supply an STL of the tube that fits inside your body tube and I'll tweak the design to fit.