Vice for Flight Controllers, ESC's and VTX's
thingiverse
I designed a vice specifically tailored for working on small electronics such as flight controllers. Printing with 100% infill was likely overkill, but printing one at 15% worked fine, suggesting that at least 50% infill would be more suitable. Supports must definitely be enabled. The footprint of the frame measures 4 inches by 2.5 inches (100mm x 60mm). The jaw opening is 2.25 inches (60mm) wide. To assemble this vice, you will need: 1 bolt that is 1/4 inch in diameter and 4 inches long 1 nylon locknut 2 1/4 nuts Assembling the vice is an extremely straightforward process. I encourage you to give it a try! If you find my design helpful, consider showing your appreciation by dropping me a dollar. Your generosity will not be forgotten, even if you choose not to reward me financially.
With this file you will be able to print Vice for Flight Controllers, ESC's and VTX's with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Vice for Flight Controllers, ESC's and VTX's.