VFC G17 Gen.5 Magbase

thingiverse

I designed this Magbase for VFC G17 Gen.5 (gas), I've included 3 versions: -V1 with round corners -V2 with angled corners -V3 SLR style, inspired by the magbase available from SLR Rifleworks Every version is available in Gen1 and Gen2. Gen1 is just Plug'n'Play. Gen2 is used with the Gen2 Pin. The pin replaces the lower part on the spring. Put a steel shaft in the Pin to prevent sheering of the Pin. To mount the Gen2 Pin: 1. Release the gas 2. take of the stock magbase 3. unscrew the 3 screws on the bottom (be sure theres no gas inside) 4. take of the bottom of the mag (dont loose or damage the seal) 5. take out the lower part under the spring (be sure not to lose it too when doing step 4.) 6.put in the printed Pin 7. mount everything back together and check if gas is escaping