Vex Robotics V5 Smart Controller Case

thingiverse

Introducing a new V5 Smart Field Controller Case for Vex Robotics. This case was inspired by the original match controller case by Bracket Bender (https://www.thingiverse.com/thing:2561511). Some images are attached in the downloads!There are numerous files for different configurations:Base:The small base is the most compact version. The large base allows for a sticker or design to be modeled into the gap. Top:The top with the hole requires the least amount of material and would be good for a field controller setup with a V5 Brain.The top without a hole (solid) can be used as a replacement. Could be used for sticker as well.The top without a hole (Full solid) cannot be used to mount a brain. A good cover for a sticker or design to be modeled on.Name Plate:Example nameplate with a number is included. Any print would have a color change after X layers.Nameplate without a number is also attached.Hardware required:8/32" x 1/2" screws (roughly) for mounting the top to the base and V5 Brain to the Top8/32" x 1/4" screws (roughly) for mounting the name plate to the baseM2.5 x 8mm screws for mounting the raspberry pi to the baseAssembly:Mount the raspberry pi to the base using the M2.5 screwsMount the V5 Brain to the top using 8/32" screws(optional) Mount the nameplate to the base using 8/32" screwsSlide the top into the base from the size and mount using 8/32 screws