VEX Robotics Match Controller and Raspberry Pi Case

thingiverse

SEE THE LATEST VERSION HERE https://www.thingiverse.com/thing:2749903 UPDATE: V2.0 - 10-7-17 - Fixed part 2 tolerating on the pi mounting points - Fixed alignment of part 2 with the pi I/O ports - Fixed plastic thickness on part 2 for the attachment of part 3 Raspberry pi 3 and vex robotics match controller mount to attach to the back of the vex field monitor stand or standard 100 x 100 mm vesa screen mount. Part 1 and 2 are the key components that make up the case. They work together seamlessly to provide a sturdy base for your setup. Part 3 (optional) is an identification tag that can be customized per event, offering several options to choose from. It's a great way to personalize your setup and make it stand out. REQUIRED HARDWARE: - 4x 8-32 x 7/8" socket head cap screws to attach case top and bottom shells - 2x 8-32 x 1/4" optional mounting hardware for part 3 - 4x 4-48 x 1/4" socket head cap screws to attach pi to case - 4x M4 x 0.7 x 8 mm socket head cap screws for attachment to vesa mount or field monitor bracket Standard 8-32" VEX screws can be used to assemble the case with ease. A M4 socket head cap screw could potentially replace the 8-32 machine screws, but this has not been personally tested yet. ASSEMBLY: - Part 2 should have 4 clearance holes for 8-32 screws - Part 1 should have 4 interference fit holes for 8-32 screws to thread in The 8-32" x 7/8" screws should slide through part 2 and the vex match controller, then thread into part 1, joining the top and bottom halves of the case together.