Vewlix Korean Stick Adapter

thingiverse

This is an adapter to use a short collar Korean arcade stick with a Taito Vewlix control panel. You will need longer M4 screws to attach the printed adapter to the stick body. 25mm or 30mm length should work. There are two models, one for flat head and one for pan head screws. There is also a 3mm spacer to set the stick to the proper height and allow room for the second dust washer under the panel. It is a separate piece to make printing easier. If it was all in one it would need supports. Attach the adapter to the plastic joystick housing using the longer screws. You do not use the original mounting plate. Then put the spacer on the panel along with one dust washer, and attach the joystick to the panel. Clearance around the mounting nuts is pretty tight so you may need a wrench to tighten them appropriately, it's difficult to get a socket on.