Vevor MX 8x14 Tailstock DRO

thingiverse

This is a remake of two other Tailstock DROs on thingiverse. It has been designed to work on the Vevor MX 8x14. Tap the top of the quill clamp for 4mm. The 4mm bolt clamps the DRO slide to the quill. I had to use a cut off wheel to shorten the DRO slide so it did not interfere with the quill dial. Also you need to score the slide 5mm from the end where the quill clamp 4mm bolt will contact the slide. The slide has a glass insert below the scale that you do not want to shatter. By scoring the slide it will prevent the 4mm clamp bolt from shattering the glass over the measurable part of the scale. A dremel with cutoff wheel can be used to cut the glass but a larger cutoff wheel and grinder will make cutting the slide itself much easier. Needed hardware: 1 M6 x 30mm button head 1 M6 Nut 1 M4 X 10mm button head Scale: 4" HORIZONTAL DIGITAL MACHINE SCALE https://www.shars.com/4-horizontal-digital-machine-scale