Vesa Mount Modular Tool Rack/Shelf/Holder

thingiverse

I have been wanting a shelf/rack that I can store tools/junks on my desk nicely, but I could not find anything that fits all of my needs. In the meantime, I had an old monitor stand with vesa mount sitting in my room. So, I decided to make one that goes on the monitor stand with vesa mount ## Vesa Mount and Screw Size The vesa mount this design is based on is: - 75mm for between inner hole distance - 100mm for between outer hole distance The screw hole is 4.5 mm. 4M screw will fit. ## Base Body and Attachment This rack/shelf is made of 1) base body and 2) attachments. File name starts with either `base_body_` or `attachment_` The base body will be mounted on a vesa mount. The attachments will be attached to the base body. I made the attachments in the way I wanted, but you can build your own flexibly. You just need to have the attachment base that slides into the base body and build an attachment on it that fits whatever your need. `attachment_base` ## Connecting the Base Body and Attachment The slot on the base body is designed in a way that can tolerate printing issues like warping or inaccuracy. They may not level when there are issues in the print, but the attachment will still slide into the base body tightly as shown in the picture. In the picture, the bottom base body had warping in the base layer but still the attachment slid in tightly ## Base Body for Top Side of Vesa Mount There are two ways to attach the base body to the top side of vesa mount: 1) Use the model `base_body_top.` This has screw hole at the bottom. 2) Use the mounting kit `top_base_mount.` You can attach `base_body_bottom` to the top with this mounting kit `base_body_top` will require a large amount of support to print