Vertical Stand & LED Ring for Thermaltake Pacific PR22 Pump/Reservior

thingiverse

This is a vertical stand for Thermaltake Pacific PR22 Pump/Reservoir combo. Print parts at 50% infill to ensure strength, as supports are not required. To assemble, visit this link - https://www.thermaltake.com.au/pacific-pr22-d5-w-silent-kit-reservoir-pump-combo.html. Four M4 screws are needed to mount the reservoir to the stand and another four for mounting the stand into the case. The ones included in the Thermaltake box work perfectly, with a length of about 10mm. Personally, I've used 10mm hex head M4 screws. ---Optional - Speed Control Gear--- This gear will slide inside the speed control on the underside of the pump and the mount itself, making it easy to control the pump speed. To use, insert a small piece of metal or plastic into the slot at the top of the gear. This will then fit into the speed control located at the bottom of the pump. Metal is best for its strength; I used a pen clip cut to size, and plastic from a credit card cut to size would also work. The last photo shows how it should look. I've been using my system with this setup for about 10 months now, and it works flawlessly! ---Optional - LED Ring--- If you want to include LEDs into your setup, print the additional LED Ring along with the mounting platform labeled for LED ring. This version gives space to route cables cleanly (as shown in attached pictures).