Vertical Samsung UN32J525DAF TV to Monitor Stand Connector

prusaprinters

<p>The idea of this one was to add a friend's 32" TV to a desk, vertically.</p><p>Odds are few if any other people will benefit from sharing this, but you never know.</p><p>This might be an average Samsung standard, so it could work with more than just the UN32J525DAF.</p><p><strong>Supplies:</strong></p><ul><li>8x M4x10mm Screws<ul><li>8x Washers for M4</li><li>8x M4x Nuts</li></ul></li><li>4x M8x30mm Screws<ul><li>4x Washers for M8</li></ul></li><li>One of each printed part</li></ul><p><strong>Notes:</strong></p><ul><li>Print with nut-indents facing down and supports on.</li><li>If you can, print this in PETG. My spool was misbehaving and I went back to using some good PLA with plenty of infill and perimeters.</li><li>I only had four 10mm M4s, so I improvised with four more 12mm M4s and used two washers per 12mm screw.</li></ul>