Vertical Cable Chain for Geeetech A10

thingiverse

# Summary This is an essential Vertical Cable Chain for Geeetech A10 Printer. It's a unique remix of "ENDER 3 - Convoyeur vertical de câbles / vertical cable chain" available on Thingiverse. # Print Settings Four prints are required: - Four BARRETTEs: Layer thickness set at 0.15mm, Raft: none, Support: none, Infill density: 100% - Two MAILLONs: Layer thickness set at 0.15mm, Raft: none, Support: none, Infill density: 100 - One MAILLON_DEPART_Z: Layer thickness set at 0.15mm, Raft: none, Support: yes, Infill density: 100% - One MAILLON_FIN_Z1: Layer thickness set at 0.15mm, Raft: none, Support: yes, Infill density: 100% - One MAILLON_FIN_Z2: Layer thickness set at 0.15mm, Raft: none, Support: yes, Infill density: 100% - One PLATINE_EXTRUD_REMIX: Layer thickness set at 0.15mm, Raft: none, Support: yes, Infill density: 100% # Accessories The following items are required: - Three rislans - Two m3x12mm SHCS screws - Two m3 jam nuts - Two m3 washers # Mounting To assemble the Vertical Cable Chain for Geeetech A10 Printer, follow these steps: - Attach MAILLON_DEPART_Z to the top of the left rear rail. - Secure PLATINE_EXTRUD_REMIX with m3 screws and m3 jam nuts on the extruder platine. Note that two holes are already present on the platine. - Use rislans to keep electrical wires safe around MAILLON_FIN_Z1 and MAILLON_FIN_Z2, as shown in the provided pictures.