Versatile tablet stand

prusaprinters

<p>I could not find any tablet stands for my iPad the way I pictured it so decided to design my own. Created this one in Fusion 360.</p><p><strong>Printing Instructions</strong></p><ol><li>No supports needed - just make sure to print on the side so it prints vertically as in the 3MF file.&nbsp;</li><li>Print at '0.3mm DRAFT' with 0 infill to make printing faster. Prints in less than 8 hrs on an MK3S. You can add infill to make it heavier.</li><li>I printed it in PETG, add a brim if you're not sure about your first layer adhesion. Better to use brim if you print in PLA.</li></ol><p><strong>Design notes</strong></p><ul><li>Viewing angles are 45 deg and 60 deg</li><li>Thickness is 5mm</li><li>10mm clearance for the tablet - enough for a simple cover</li><li>Total height is 20cm - so it fits in the MK3S</li><li>Can also be used upside down - see photo</li></ul><p><strong>Update</strong></p><p>Added a version with hearts instead of hexagons, enjoy!</p><p><i>If you print this, please post a make. Feedback and suggestions are appreciated!</i></p>