Vernier Calliper Peg Bracket (with the power of magnetism)

prusaprinters

<p>This is a remix of the following parts. I literally smooshed them together and added some holes and a few chamfers:</p> <p>Bracket vernier calliper (Peg mount) (<a href="https://www.thingiverse.com/thing:2866877">https://www.thingiverse.com/thing:2866877</a>) by ArneBanane</p> <p>Pegboard 2 position blank - squared up and cleaned up (<a href="https://www.thingiverse.com/thing:2832370">https://www.thingiverse.com/thing:2832370</a>) by cmh</p> <p>Thanks to ArneBanane and CMH for posting them!</p> <p>This is just a pegboard mount for a vernier caliper. It has a hole in case it needs some help staying on the pegboard, and there is also a place to put a 8mm x 3mm cylindrical magnet in the back of it to help hold the calipers in place. I normally use Gorlilla Glue to do that but any good plastic glue would work. You can find the magnets at <a href="https://www.amazon.com?linkCode=ll2&amp;tag=thingiverse09-20&amp;linkId=e4759bff1fa9a55a0f897d801ce2d765&amp;language=en_US&amp;ref_=as_li_ss_tl"> </a><a href="https://www.amazon.com?linkCode=ll2&amp;tag=thingiverse09-20&amp;linkId=e4759bff1fa9a55a0f897d801ce2d765&amp;language=en_US&amp;ref_=as_li_ss_tl"> Amazon</a> by searching for B0714KZP5C. The mount is a tight fit for my pegboard, but holds it really well (I did not need to use a screw), thanks to the well designed pegboard blank by CMH.</p> <p>I suggest printing this in the tall or vertical orientation with a raft or brim, and supports everywhere, I used 30% infill and 1.2mm sides and base, but that is probably more than is needed for something like this.</p> Category: Tool Holders & Boxes