Ventilator grille
thingiverse
I couldn't find anything like this on Thingiverse, so I designed two sizes of ventilator grill to fill the gap. The large one measures 125mm x 140mm, while the small one is 72mm x 140mm in size. The screw holes are no 4 (3mm) countersunk for easy attachment. Print Settings: Printer: Weistek WT280A Rafts: Not needed for this design. Supports: None required for optimal print quality. Resolution: Set to 0.2 mm for a smooth finish. Infill: Higher infills (>50%) produce better results, but it's up to you to decide the level of detail desired. Notes: The angled sections printed perfectly on my Weistek without any supports. They are intentionally set at 30 degrees from horizontal to provide maximum airflow. Post-Printing: After printing, I had to carefully clean up the top edges of the angled sections at the ends with a scalpel to achieve a professional finish.
With this file you will be able to print Ventilator grille with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Ventilator grille.