Vented case for Raspberry Pie 4 (or its BTT clone with CB1/CM4 with heatsink) and SSD

prusaprinters

BOM2.5 mm bolts16mm x 46mm x 22.5mm nuts (x2) are optional10 or 11 mm rubber feet x 4 (optional)Assembly:print 3 partsmount heatsink onto CB1/CM4, and then CB1/CM4 onto Pi adaptermount Pi adapter w / heatsink into the mid part using 6 mm boltsassemble all 3 parts using 16mm bolts tucked through the corner pillars from the bottom up, push first and screw for final 4 mm. Bolts should be fully screwed in so that SSD cradle is fully accessible.attach rubber feetslide 2.5" SSD into the bottom tray until it clicks into proper positionusb-to-sata adapter can be used to drive SSD