Vase Torso Sculpture

prusaprinters

<p>Hi&nbsp;</p><p>this is a torso model made with a free form tool in CAD.&nbsp;<br>Hope this does not count as nudty.&nbsp;<br>The model has some overhang, make a testprint in the “upper body area” to check if your printer/material will create warpage.</p><p>Print instructions<br>1. I scaled the model a bit bigger. ( X,Y,Z = 1.4)<br>2. I used vase mode with a high wall thickness / layer width of 0.65mm on my 0.4mm nozzle.<br>3. I set 3 bottom an 5 top solid layers.<br>4. No infil was used althought I had trouble to get connection on the upper solids due to no infill with vase mode.&nbsp;</p><p>*WARNING when using the GCODE<br>refering to print insctructions No4. The TOP solid Layers have hard times to connect due to large overhang. Actually I did something really dirty and I am ashamed. When I noticed that the upper solid layer did not connect due to the large overhang, I pushed the model with my finger so the nozzle touched the single walls better). I am sure you can create a better GCODE yourself</p>