Vase Mode Lamp Shade

prusaprinters

<p>The lampshade was getting old and ratty so I decided to try making a replacement. The inner connector has a slight taper and gets a pretty good friction fit, probably doesn't need to be glued. Being vase mode it probably won't hold up to a lot of abuse.</p> <p>Connector slides onto lamp socket that's around 32-33mm.</p> <p>Note: since this uses PLA you probably only want to use this with a cool LED bulb.</p> <h3>Print instructions</h3><h3>Category: Replacement Parts Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> I3 MK3S</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.3</p> <p><strong>Infill:</strong> varies</p> <p><strong>Filament:</strong> 3D Solutech &amp; Prusament PLA Clear &amp; Galaxy Black<br/> <strong>Notes:</strong></p> <p>The connector was printed with 10% infill and a few top/bottom layers. The shade itself was printed in vase mode (0.3 layer height) with fan off and I put in a couple filament changes for the black trim on top/bottom. The top got a bit "thin/fragile" so you could trim off 8mm or so, or change layer height up there.</p>