Vase Mode Draw Unit

prusaprinters

I wanted something to sit next to my printer on my desk, so I would have spare nozzles,Allen Keys spare V Wheel Bearings ect in 1 place.Top and bottom draws are 20mm deep the 3 center draws are 17.5mm deep.Draws and the Housing are done in VaseMode( See my Vase mode settings Below)Vase Mode Settings:Theses are the main settings to Change if your Using Simplify3DThese give me extra strengh in the print as the line width is 2x the size of the 0.4 nozzle.Under Layers TabInfill 0%Primary layer Height 0.2800Top solid Layers 0Bottom Solid Layers 3Outline/Perimeter shells 1And put a tick in the box for Single Outline Corkscrew printing mode (Vase Mode)First Layer Height 100%First Layer Width 100%First Layer Speed 50%Extruder SettingsSpeedsDefault Print Speed 60.0mm/sOutline Underspeed 50%Extrusion Multiplier Set to 1.10 (This compensates for the extra line width.)Extrusion Width 0.80mm ( Extrudes 2x the 0.4mm nozzle width.)Speed Overrides SettingTicked Adjust printing speed for layers below 15.0 secAllow Speed reduction down to 70%---------------------------------------------------------------------------------------------------For the Slats inbetween the Draws and the handles Just Normal print mode with w 2.8 layer height.If you need any other help please use the comments and Ill try to help as best I can.Filament Used: eSun Matte PLA Black and whitePrinted on a Sunlu T3 stock Printer.