Vallejo Paint Stand

prusaprinters

<h5>Features:</h5><ul><li>Different versions of the parts so you can customize it for your needs.</li><li>Relatively short print times.</li><li>Assembly with little to no glue.</li><li>Small overall size.</li></ul><p>Before you start printing choose a Horizontal for how many paint tubes across you want for your stand (5 pictured above), and a Vertical for how high you want (3 pictured above).</p><p>You will need a Horizontal plate for each layer high you want and one corresponding Support. If built for 5 wide or less only 2 Verticals are needed, for 6 or greater you will need 3.</p><h5>Note:</h5><p>These parts have a nominal interlocking clearance of .10mm. This fit is intentionally a little tight. Due to this it is necessary for your printer to be properly calibrated for dimensional accuracy.</p><h5>Assembly</h5><p>All connections are press fit, but if they are loose use a few drops of super glue.</p>