V-Core 3.1 - ABS Optimised Parts
prusaprinters
<p>If you want to enclose your V-Core 3.1 then ABS will get you higher temperature resistant parts. This whole set of files is optimised to be easier to print with better looking results when using ABS.</p><h4>General Change Goals</h4><ul><li>Improve printability especially for ABS.</li><li>Printed parts to require no treatment after printing</li><li>Screw insertion to never require force</li></ul><h4>Common Changes</h4><ul><li>Low layer chamfers changed from 45degrees to 63degrees</li><li>Screw Hole diameter increased to be 0.5mm larger than Metric size</li><li>Overhanging hole layer manipulation</li></ul><h4>Print Settings</h4><ul><li>Recommend ABS if possible, otherwise try Ooznest ABS Pro. Avoid esun abs+.</li><li>I use 5 top, bottom and perimters</li><li>20-25% infill, gyroid or grid.</li><li>0.2mm layer height</li><li>0.4mm nozzle/line width<br> </li></ul>
With this file you will be able to print V-Core 3.1 - ABS Optimised Parts with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on V-Core 3.1 - ABS Optimised Parts.