USBtin D-SUB case
prusaprinters
This is a case for the USBtin (https://www.fischl.de/usbtin/) CAN bus USB adapter. The design is intended to protect the PCB and at de same time adapt to the widely used D-SUB connector. The lid should click in place nicely but is not intended to be totally tight. I used two M2*4 self tapping screws to fix the PCB in place. For the D-SUB connection you will need a standard panel mount female d-sub connector socket and matching mounting bolts. Then just solder the CAN wires to the D-SUB interface and use the screw terminals to connect to the USBtin. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Infill: 20 % Filament: DasFilament PLA transparent Notes: Supports are not needed for the lid. Depending on your printer you can also print the bottom part it without supports, but I would recommend them to get nice openings for USB and D-SUB. Category: Electronics
With this file you will be able to print USBtin D-SUB case with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on USBtin D-SUB case.