USB Type A+C PD+QC Power Supply

grabcad

This USB power supply provides 3 ports to concurrently power 3 devices with a total of 50W. The ports included are two Type A 3.0 ports and one Type C port. The USB ports support the following protocols: PPS, PD3.0, QC3.0, QC4+, SCP, FCP, AFCParts List:- Epson DL-180 power supply- Baseus module USB Type A x 2 plus USB C connectors- Riden TC64 USB Type C tester module- 3D printed enclosure (custom for this project)- Power switch- Wire, screwsSince I had the power supply spare, this turned into a low cost, yet smart and powerful power source.The Epson power module is readily available, new or used. For example, at this unaffiliated link for AU$30:https://www.ebay.com.au/itm/182205261116?hash=item2a6c47a53c:g:ObMAAOSw0kNXhvnA:sc:AU_RegularParcelWithTrackingAndSignature!2214!AU!-1The "smarts" for this power supply comes from the power module out of the Baseus CCBX-120U3 adapter. This module has the following outputs: USB1/USB2: 5V/3A, 9V/2A, 10V/2A, 15V/2A, 12V/2.5A 30W Max Type-C: 5V/3A, 9V/2.22A, 12V/2.5A, 15V/2A, 20V/1.5A 30W MaxA source example for the Baseus CCBX-120U3 at an unaffiliated link for US$30:https://www.amazon.com/Upgraded-Version-Charger-Baseus-Charging/dp/B099F9G2V9A source example for the Riden TC64 USB C Tester at an unaffiliated link for AU$14:https://www.amazon.com/DollaTek-Display-Voltmeter-Multimeter-Recharge/dp/B07PJHDQQC/ref=sr_1_2?keywords=tc64&qid=1636259018&sr=8-2Here is my 3D design. My design may match your needs, too.My print is made in PETG 1.75mm Aurarum red filament, with 0.2mm layer height and 15% infill on a PRUSA I3 MK3S printer.I hope you can find this design useful, too.Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.