USB Keychain - For Flexible Filament

prusaprinters

<p>I wanted a way to attach my Logitech Unifying Receiver to my key ring as the MX Master mouse I recently purchased didn't have a way to contain the receiver internally.</p> <p>I printed the original model in TPU and it was too large and not leveled on the build platform (it was tilted a few degrees on the Y-Axis). As a result of not being leveled, the skirt intersected the model and caused blemishes. .I have decreased the X and Y dimensions by 8% and adjusted the tilt so that the model is settled on the build platform.</p> <p>Now, when printed with a flexible filament, it grips tight and I'm not concerned about my receiver falling out.</p> <p>When coupled with the clip on this mouse case, it's a perfect combination and attaches quite nicely to my laptop bag.<br/> https://www.amazon.com/gp/product/B01E5BAYWS/ref=oh\_aui\_detailpage\_o01\_s00?ie=UTF8&amp;psc=1</p> <h3>Print instructions</h3><h3>Category: Computer Print Settings</h3> <p><strong>Printer:</strong> Monoprice Maker Select v2.1</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> .1</p> <p><strong>Infill:</strong> 30%</p> <p><strong>Notes:</strong></p> <p>Print in a flexible filament for best fit.</p>