USB IR / Infrared Toy v2 - Case
prusaprinters
<p>I didn't like any of the cases available for the IR Toy v2 which I was able to find on Thingyverse, so I went ahead and created my own case. The advantages of this compared to others is that it is not oversized, allows good IR reception, the unit fits perfectly, no glue is needed to close the case and there are separate holes for all sensors / emitters.</p> <p>This case if for the following device: <a href="http://dangerousprototypes.com/docs/USB_IR_Toy_v2">http://dangerousprototypes.com/docs/USB_IR_Toy_v2</a></p> <h3>Print instructions</h3><p>Rafts: No</p> <p>Supports: No</p> <p>Resolution: 0.15mm layer @ 60mm/s</p> <p>Infill: Doesn't matter</p> <p>Notes: This piece is specifically designed to be printed with a 0.4mm nozzle and an extraction width of 0.45mm and a layer height of 0.15mm.</p>
With this file you will be able to print USB IR / Infrared Toy v2 - Case with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on USB IR / Infrared Toy v2 - Case.