USB Endoscope Mount

thingiverse

I'm sorry for any confusion caused by my initial mistakes with file names, which I've now corrected after work hours. All issues are resolved. Please note that the slit in the "Cam Clamp" is 0.35mm. When printing this part, I found it slightly fused together. To separate it, I used an X-acto blade and was careful not to cut myself. Be extremely cautious when performing this task as the small part can roll, causing the blade to slip. This mount is designed for a USB Endoscope with a 7.4mm or 0.291" diameter and replaces the metal Extruder Fan Guard on the Artillery Sidewinder X1. I've created two fan guard designs: "Fan Mount Centered" with lugs centered around the Cam Link, and "Fan Mount Offset," which has offset lugs specifically for the Artillery Sidewinder X1. This design puts the camera inline with the Nozzle. You can use this mount with or without the "Cam Link." When used, it adds a second joint for adjustment and 10mm extension. I recommend using a 1/4" #4 sheet metal screw on each side for secure attachment. Thank you.