USB Cable Winder Stackable
prusaprinters
<p>Author : TinkrMakr</p><p>I changed the angle to 45° because I read in the comments that some people had problems to properly print the lower part of the model. I had the same problem, but I don’t think it came from the angle of the model but from the fact that I was printing the PETG with too low a temperature. I have an MK3S with the MMU2S, and when I print Prusament PETG in single material the nozzle temperature is set to 250° whereas when I use multi material with the same material the nozzle temperature is set to 230°? And that’s why I had printing quality problems on the lower part of the model. I realized by printing the temperature tower, below 235° the quality is not there. I will soon relaunch a print of the model with the original 35° angle using the correct print temperature</p><p>Thank to TinkrMakr for his work and sharing.</p>
With this file you will be able to print USB Cable Winder Stackable with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on USB Cable Winder Stackable.