US-100 Sonar Distance Sensor
grabcad
Measured with a caliper and modelled in SOLIDWORKS 2021 Standard. Actual nominal dimensions might be slightly off due to measurement inaccuracies.The US-100 can be used in Trig and Echo mode like the HC-SR04 sensor or in UART mode. The mode is selected by the header jumper on the back. It can use either 3.3V or 5V and is sold by Adafruit.https://www.adafruit.com/product/4019NOTE: The TX and RX marked pin on the US-100 connects to the TX and RX pins of the MCU RESPECTIVELY. The US-100 TX pin does NOT connect to the RX of MCU and vice versa.
With this file you will be able to print US-100 Sonar Distance Sensor with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on US-100 Sonar Distance Sensor.