Upright stand for 2-in-1 laptop 14" Dell 7410

prusaprinters

<p>An absolutely <i>bonkers</i> vertical (aka "portrait") laptop stand designed for the 14" Dell Latitude 7410 laptop.</p><p>It keeps the laptop at eye level, resulting in a second screen whose position and height is comparable to the vertical side of a 27" monitor. A bit narrow, but pretty decent for documentation!</p><p>Fold the laptop in tablet mode, then insert vertically. The usb/HDMI/power ports are accessible from the bottom, which is the ideal orientation in this configuration (all cables flowing down).</p><p>Might fit other 2-in-1 laptops: maximal thickness when folded shouldn't exceed 21mm. Width is adjustable in 7mm increments using the supplied base retainer, starting from a minimum of 210mm and going onward.</p><p>Rock-solid and stable due to the extra-large base. And quite heavy too! There are ventilation grills on both sides (the images show an early prototype).</p><p>Requires a bed of at least 250mm on one side. This <i>barely</i> fits a MK3.</p><p>Supports are required for all parts except the retainer.</p><p>Once printed the top and bottom parts needs to be paired through the dovetail joint. It is intentionally tight, and needs to be hammered in using a light rubber hammer.</p><p>Category: Computer</p>