Upgrade Effector with round fan duct for Kossel / Delta (D810)

thingiverse

This is a brand new Effector for Kossel Delta 3D Printers. Features: Easy and stiff hotend mount comes with a clamp that uses two M3 screws and nuts. Fan mount allows for hotend / heat break cooling, no extra shroud required! Round fan duct provides 360° part cooling. Mount is designed for a 5015 blower style fan for part cooling. Mount is also available for an 18mm autolevel sensor (I used a LJC18A3-H-Z/BX). Materials you'll need: 2x M3 x 14mm screws and M3 nuts 6x M3 x 20mm screws (from the old effector in my case) 12x M3 nuts for mounting the arms (from the old effector in my case) Autolevel Sensor (optional) 5015 Blower type Fan (optional) I designed this effector specifically for my Zonestar D810, but it should fit any Kossel (~20x30cm build volume). Print Settings: Printer: Zonestar D810 Rafts: No Supports: Doesn't Matter Resolution: 0.2mm Infill: 20% Notes: All parts are uploaded (STL files) in the right orientation to print them. The parts should be oriented as follows (orientation reference is as mounted on the printer): clamp: top/bottom (flat site) on the bed fan duct: bottom (air exhaust vents) on the bed connector: top (mount to effector) on the bed effector: bottom on the bed Post-Printing: Mount the effector to the Printer. Mount the connector to the effector. Mount the hotend with the clamp. Glue the fan duct to the connector. Upgrades for my D810