[Updated] Voronoi Raspberry Pi 3B+ Case

youmagine

Update 2: Multiple versions of the case now have slots for camera and display cables, enabling all possible combinations of GPIO, display, and camera usage. The .STL files indicate which slots each design features. Update: A second version of the top part is added with a cut-out for those who want to use the GPIO pins. The .STL file is included with the thing files, along with an extra image showing the cut-out with official 3B+ technical drawing as an overlay, based on which the location of the cut-out was determined. This design is based on 0110-M-P's design at https://www.thingiverse.com/thing:922740. Several changes have been made in this model compared to the original: Voronoi pattern cutouts are added to the top and bottom pieces, allowing Raspberry Pi chips to radiate heat. Mounting holes are removed from the bottom part of the enclosure for increased strength and durability. Thicker mounting standoffs enhance strength and durability. Hexagonal cutouts on the bottom part allow closure with M3 nuts and bolts. The Raspberry Pi can be mounted using M2.5 nuts and bolts. Increased hole diameter means no tapping is required, but requires using nuts to close the case and mount the Raspberry Pi. The fourth image shows exactly what hardware is needed for mounting the Raspberry Pi and closing the case. Hardware links are provided: M2.5 hardware: https://bit.ly/2xCqL83 M3 hardware: https://bit.ly/2UJIxOD Support If you want to support me for free designs, consider using my AliExpress Affiliate Link (https://bit.ly/2XYWpHW) when buying something from AliExpress. It doesn't cost extra but helps out a lot. Both links in this post are affiliate links.