Update 2: V2 ImpulseRC Apex DC DJI O3 Camera Mount by enrico320i

thingiverse

Testprint Done and New Pictures Online V2 Bolt only Mount on a ApexDC fits nicely. Look how i set the Support, dont do any Supports on the lower Standoff Bolts. I set 3 Support Blocker in Cura, see pic. Update 2: Adjusted the holes for the front mount to 2.6mm perfect fit now. Update 1: I Uploaded a V2 that dosn't need M3 Nuts. It's more easy to mount, you only need to Bolt in four M3 srews in the front holes where original the Standoffs are srewed. The M3 Bolts can go 8mm in the Tpu, make sure they are not going deeper than 8mm in the TPU or you demage the Mount(holes are 8.5 for safety). It is a Snug fit and should be stronger than with the M3 Nuts. I make a test print today and ad pictures, but here it is, try it out. thanks for the User input. I let Both files online, so you decide what you like better, i only changed the file name to make it clear V1 is the first Mount with M3 Nuts. The V2 the latest without M3 Nuts needed. I alredy made a similar DJI O3 Camera Mount for the Vannystyle Frame. I saw a lot of people with the same problem on the Apex, so I did some work and made this Mount fit for the Apex. The DJI O3 Camera is good Protectet from TPU and does not stand out to much, it is in the best position where normally the Standoffs are. No Standoffs in the front position anymore with this O3 Mount. So the DJI O3 Camera has full 20mm all the way in the front part. You only need four M3 Nuts, i recommend Metal ones without lockring, but they fit all with a snug press also lock ones, but it's harder to get it tight.(hold with a screwdriver) V2 with More Protection and the camera is now adjustable in a Range arround 10 -35 deg, mabey more. Print Setting: Sainsmart TPU, use 99 Walls or 3 walls and 100% infill for most strenght, 0,2 high is fine, i recomend Tree Support everywhere. This Thing is a Work-In-Progress, but i did my research and messurments, so it should fit nicely. Any Feedback from you guys would be great.