UNW P90 HI CAP 50 CAL mag a hopper adapter for the UNW P90 platform

cults3d

in case you like to switch over in fast way from Magfed to Hopper feed gameplay. or when you like to play with a hopper in a bullpup setting and need some more clearance from your mask. in case you want my opinion, then do I only recommend the Model 1 gives you more clearance from your head and the hopper especially with a mask on… but it does require that you need to chance out the front mount to the lower profile mount. in case you use the iconic P90 rail mount. unlike with the 68cal version does the 50cal edition have a door so you can just remove it like a normal mag. compatibility note: the Model 1, can only be fitted with 2 out of the 3 front mounts see the pictures for more details. (for the 68 cal) I have tested both the dye Rotor 1 and R2 and the virtue spire IR they can clear the P90 rail mount in the Model 2 version. and both seem to feed well when pointing the barrel downwards. and this was a concern if it still would feed right in this way… marker wise is there is not really a limit so long the mounts are supported the RunQI could technically work with the Model 2 version but then you would have to “hip fire” since looking over the stock would be to difficult. Video Links: The UNW P90 Hi cap mag or in other words a hopper adapter for the UNW P90https://www.youtube.com/watch?v=A3yAlBoDHIghttps://odysee.com/@UntangleWORKS:a/UNW-P90-Hi-cap:b materials needed: 6x m3 bolts 25mm long 4x m3 bolts 14mm long 1x m4 bolt 20mm long 1x m4 nut 1X SPRING 15mm long, 0.3mm wire, 4mm OD