[!UNTESTED!] (almost) Full Metal AWD Mod for the RatRig V-Core 3.1

prusaprinters

<p>This is merely a pre-release for adventurous builders before i get around to installing this system on my machine, tread carefully. A modified version of the enclosure 2.0 front panel is in the works.&nbsp;</p><p>&nbsp;</p><p>This modification is technically compatible with a regular, unenclosed V-Core 3.1, although you will have to move the front upper 3030 extrusion down to clear the belts.&nbsp;</p><p>&nbsp;</p><p>This modification requires the use of D_Jespersen's Motor decoupler-Damper mod (amazing upgrade for any printer that can fit it, i recommend you add those to the 2 rear AB motors as well).</p><p>To upgrade your printer, you will need some hardware:</p><p>4x AWD_plate cut from a 4mm sheet metal of your choice (steel or aluminium is recommended)</p><p>6x Enclosure 2.0 idler bearing stacks (including all spacers) (2x included in enclosure 2.0 kit)</p><p>6x m5x55 cap head Screws</p><p>2x m5x20 countersunk Screws</p><p>8x m5 hex nyloc Nuts</p><p>4x m6x18 cap head screws (included in enclosure 2.0 kit)</p><p>4x m6 3030 drop-in nuts (included in enclosure 2.0 kit)</p><p>+ All hardware necessary for the Motor decouplers by D_Jespersen, except for the m3 heat-press inserts</p><p>+ new belts, this modification adds around 30cm per belt</p><p>&nbsp;</p>