Universal portable ADT Link UT3G R43SG K43SG eGPU Enclosure Case

thingiverse

Upadte 01.11.23:This would be my last Update on this. Ive updated the Bottom Parts just adding foots and Holes just for prevent any heat related IssuesUpdate 31.10.2023:Updated Front+Backpanel 3d Files: Screw Holes should now fit in with the other Parts/Panels.Credits go to https://www.tinkercad.com/users/6BUfItrUyLC Gary Bagley : I just refit its Case to make it more portable. Description: Print in PETG or ABS also 20%+ Infill is reccomended, also M3 threads (M3x5) +Screws (M3x10)needed to connect the Front and Backpanels with the other Panels of the case : You need to Print the (H-) Key 12 times.Just connect each Parts (i.e.: Botom 1 + Bottom 2) with the (H-Keys): You need to (Power) Glue the Keys into the Panels. After that Put M3 threads into the Holes of the Front and Backpanel and connect them with the other Panels with M3 Screws. Also dont forgot to Screw the PSU onto the Frontpanel and Put the ADT Adapter on the Bottom (No Screws for the ADT Adapter neeeded) and connect it with the PSUTotal size is around 230x165x160mm and supports the ADT R43SG/UT3g/K43SG Adapter, (All Adt Adapter with dimensions of 225x65mm Should work) GPU's up to 20 cm and SFX PSU, also SFX-L psu's are supported but if you using an SFX-L Psu i recommended an Modular SFX-L PSU otherwise you ran into Problems of "Cable Space".All Parts are printable with a minimum Build Volume of 180x180mm