Universal E3D Hemera MGN12 Bracket with Gates PowerGrip GT2 Belt Clip

thingiverse

Mounting an E3D Hemera Extruder to Any MGN12 Linear Rail Carriage is a Straightforward Process: Simply Attach the Belt Bracket to the Top Two Holes and Secure with M3 Bolts. To get started, locate the top two holes on the linear rail carriage designed for mounting the belt bracket. Tap these holes with an M3 bolt tap to ensure a secure fit. This will provide a sturdy foundation for the belt bracket and the E3D Hemera extruder that follows. Next, securely attach the belt bracket to the carriage using the tapped holes. Make sure it's firmly in place before moving on to the next step. Now, take the E3D Hemera extruder and attach it to the bracket you just installed. This will give your 3D printing setup a significant boost in terms of print quality and speed. Finally, secure the belt bracket to the extruder bracket. This is a crucial step that ensures everything stays in place during operation. Be sure to tighten all bolts firmly but avoid over-tightening, which can damage the carriage or other components. Notice the access hole drilled into the x-axis bar. This hole was intentionally added to make it easier to install the belt bracket without having to remove any parts from the system. By using this hole, you'll be able to work more efficiently and get your setup up and running in no time.