Universal Door Sliding Sign (Free / Busy indicator)

prusaprinters

<h3>Universal Door Sliding Sign</h3> <p>A simple frame with sliding pane to select between two large 5x5cm signs. The signage is just a simple sheet of paper and can be exchanged from above. The template (to be printed and cut-out) is also included as an Inkscape SVG file for easy editing!</p> <p>The image shows a typical FREE / BUSY selector, with a sample PDF for quick printing.</p> <h3>Printing and installation</h3> <p>Print the parts as given, no supports required. Use your favorite material. A layer-height of 0.2mm is recommended.</p> <p>The frame is printed in an upside-down orientation: note the recess for the paper is on top.</p> <p>Position the slider in the middle of the frame by inserting one "V" side in the internal part of the frame, then<em>gently</em> force the upper part into the frame by bending it slightly until it snaps into place. Once inserted the slider should move freely side-to-side.</p> <p>Use double-sided tape on the outer parts in the rear of the frame (2 sides and bottom). Again note that the recessed slot for the paper<em>should be on top</em>, where the bezel is thinner. After checking the orientation affix it to a wall or door. Glue can also be an option.</p> <p>Open the SVG template in Inkscape (or your favourite SVG editor) to customize the sign. Choose the appropriate page size, then print at 100% scale and cut along the outer border. Slide the paper from above and into the sign.</p> Category: Office