Universal BTT SKR V1.3 & v1.4 Box

thingiverse

This is a modified version of my Universal Einsy Box designed specifically for use with BTT SKR V1.4 (also compatible with V1.3) printers while retaining all the advantages and features of the original, such as compatibility with Raspberry modules, Zaribo, Bear, and Stock frames. Other components like Fan covers and Raspberry modules can be found at https://www.thingiverse.com/thing:3901001. The Bear ends and Raspberry Bear modules are available at https://www.thingiverse.com/thing:4210933. Optional features include a cuttable port for adding an esp8266 board with its cover, as well as the ability to install it on an auxiliary board slot that requires a cable (as shown in the pictures). Anchor_SKR_Bear_Short_1 is designed specifically for Bear Ends, while Anchor_SKR_Bear_Short_2 is intended for Raspberry Bear Modules. This design has been thoroughly printed and tested. ### Updates: 2020/02/26: The distance between the two left holes (main cover) is now set at 71.5mm, allowing for a standard 80x80 fan to be attached using these holes. 2020/03/04: The micro SD port has been enlarged slightly for improved functionality. 2020/03/07: The box height has been increased by 10mm to provide more room for power cables and other components. 2020/03/08: Additional anchors (specifically designed for Bear and Zaribo frames) have been added due to the increased height of the box. 2020/03/25: Improvements were made to the USB and SD card ports for enhanced performance. 2020/03/27: The additional boards slot has also been improved. 2020/04/02: To prevent interference with the X-Motor on Bear frames, the frame holes have been moved 2mm towards the heatbed. 2020/05/11: The heatbed port was angled upwards by 30 degrees for better accessibility. Additionally, one tab from the additional boards slot was removed to improve access to a nearby screw. 2020/06/15: A nylon hole was added to the extruder port, and a new hex ventilation grid design was implemented that no longer prints on air. **2020/09/18:** The heatbed port has been enlarged by 25% for improved functionality.