Unifi USG Rack Mount Adapter with Cooling

prusaprinters

<p>These are the problems that I aimed to solve with this design:</p><ul><li>Issues with sag and flex in the front plates of similar designs.</li><li>Lack of support for and a way to secure the USG in similar designs.</li><li>Both my USG and Switch are passively cooled and are always hot to the touch.</li></ul><p>My design mounts between the left ear of the switch and the left side of the rack. The USG is meant to slide in from the front for a snug fit so air passes through it and not around it. The fan pushes air into both the USG and the switch via the dividing box between them. Even on its slowest setting, both are now cool to the touch.</p><p>Notes:</p><ul><li>The USG's rubber feet need to be removed in order for it to slide into the part.</li><li>The fan box is a separate piece and must be glued to the main body piece.&nbsp;</li><li>I used a Noctua 40x40x20mm fan and it was a very snug fit in the fan box. You may need to experiment and scale the fan box slightly to get a good fit if you use a different fan.</li></ul><p>&nbsp;</p>