Underwaterhockey stick

prusaprinters

This is a right-handed stick for use in the sport underwaterhockey. UWH is played on the bottom of a swimming pool with scuba-gear, a cap, glove and a stick like this one. You can read more about the sport here: https://en.wikipedia.org/wiki/Underwater_hockey For promotional goals I created this simplified stick to be printed at 20% scale to hand out to children. The first picture features a full size XT-CF20 print, a bronzeFill and brassFill mid-sized print and a smaller woodFill print. Check out my (quite old) article on 3Dhubs for the bronze print as well: https://www.3dhubs.com/talk/thread/bronzefill-patina-processing The other pictures are taken of these 20% scaled prints. You can also print them together with the puck: https://www.prusaprinters.org/prints/34875-underwaterhockey-puck -- Update 20-02-2014 -- I've added a holed version, designed for use as a keychain. Again, re-scale to 20% for a nice size. -- Update 16-05-2015 -- Another update, adding uwh-stick2.stl which has a curve on the bottom of the handle as well. This will need some support to print properly. Also added another picture. Print instructionsCategory: Sport & Outdoors Summary The first picture features a full size XT-CF20 print, a bronzeFill and brassFill mid-sized print and a smaller woodFill print. Check out my article on 3Dhubs for the bronze print as well: https://www.3dhubs.com/talk/thread/bronzefill-patina-processing The other pictures are taken of these 20% scaled prints. Instructions Download. Slice (I used both Slic3r and Cura), a little infill (20%) and layerheight depending on the quality you want. Print. Post-process if you want. Enjoy! The bronzeFill print has been post-processed using a mixture of salt, vinegar and ammonia. For more info see the 3Dhubs talk: https://www.3dhubs.com/talk/thread/bronzefill-patina-processing.