Undermount Desk Drawer for Ender3 Size Printer (With STEP File)

thingiverse

This is a slide-out desk drawer that can be printed on an Ender3 size printer (you can find a larger CR10 size drawer here - https://www.thingiverse.com/thing:4102374). A cable management clip is included which allows a USB cable to be passed into the drawer and secured to it using a zip tie if needed. The dovetail rail appears to be pretty strong, though I did not test how much weight this can hold. I plan to use it for storing some office supplies and a phone. There are now also some cable management parts included. There are three versions of the drawer: undermount-drawer-ENDER3-2A-DRAWER.stl (69mm tall) undermount-drawer-ENDER3-2A-DRAWER-TALL.stl (85mm tall) undermount-drawer-ENDER3-2A-CUBBY.stl (69mm tall - no handle, open front) The drawer requires the following hardware: 2x M4 brass inserts and 2x M4 x 14 (or 16)mm button head screws for mounting the handle. The Cubby does not require any hardware since it has no handle. Optionally, a M4 nut and M4 screw can be used to "lock" the drawer, though this is probably more trouble than it is worth. To install the handle, I first heat set the M4 inserts into it, then the handle inserts are placed in the pockets of the handle (they can be glued or not). Then attach the handle with the inserts on the drawer. If the inserts are too tight, either scale them down to 99% and re-print them or sand them. Then use the two M4x14mm screws to install the handle. I printed mine in 0.2mm resolution using a 0.4mm nozzle. I suggest printing with 3 walls minimum and 20% gyroid infill worked for me. Unfortunately, no pictures are available, but it turned out pretty well. The STEP file is included for easy remixing. If you make one please post a make and if you have feedback, please post a comment. Parts are not oriented for printing.