Undermount Desk Drawer for CR10 Size Printer (With STEP File)

prusaprinters

This is a slide out desk drawer than can be printed on a CR10 size printer (an Ender3 size drawer remix can be found here - <a href="https://www.thingiverse.com/thing:4115043">https://www.thingiverse.com/thing:4115043</a>). There is also a cable management clip which will allow a USB cable to be passed into the drawer and secured to it using a zip tie if needed. I did not test how much weight this can hold, though the dovetail rail does seem to be pretty strong. I plan to use it for storing some office supplies and a phone. There are some cable management parts included now also. The drawer requires the following hardware (not including mounting hardware): 2x M4 brass inserts 2x M4 x 14 (or 16)mm button head screws for mounting the handle Optionally a M4 nut and M4 screw can be used to "lock" the drawer, though that is probably more trouble that it is worth. To install the handle, I first heat set the M4 inserts into it, then the handle inserts are placed in the pockets of the handle (they can be glued or not, does not matter). Then attach the handle with the inserts on the drawer. If the inserts are too tight, either scale then down to 99% and re-print them or sand them. Then use the two M4x14mm screws to install the handle. I printed mine in 0.2mm resolution using a 0.4mm nozzle. I suggest printing with 3 walls minimum and 20% gyroid infill worked for mine. The first one I printed I found that the nozzle on my printer was worn so it caused a poor surface finish, but the 2nd one I printed with a new nozzle was much better and that helped the slides operate better. The STEP file is included for easy remixing. If you make one please post a make and if you have feedback, please post a comment. Parts are not oriented for printing, Update: 1/19/2020 The Mount has been updated with a new version which is a bit tighter fit (undermount-drawer-1Z-MOUNT.stl). I have tested this model and I think the fit is better, but if you have a problem I let me know and I can upload the model with more clearance. I am moving this from WIP since it has been tested. <h3> How I Designed This</h3> This was designed with ViaCAD V9 Category: Organization

Download Model from prusaprinters

With this file you will be able to print Undermount Desk Drawer for CR10 Size Printer (With STEP File) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Undermount Desk Drawer for CR10 Size Printer (With STEP File).