Under-the-Table Discrete Remote Holder with Honeycomb Sides
prusaprinters
This is a remote control holder that mounts to the underside of a desk or table. It has honeycomb sides to save on some filament. It mounts with the 4 tabs on the top of the model. The 4 holes directly below the tabs are to allows access for a screwdriver to reach the screws to secure the holder.The longer hole on the bottom is for access by fingers if a small remote gets pushed to the back and cannot be easily pushed out. That way you can nudge it forward without having to get between the honeycomb holes.I printed with 0.20mm layer height with PETG and supports for the mounting tabs. The support material was a pain to clear away from the honeycomb holes but I believe it is necessary for the tabs.
With this file you will be able to print Under-the-Table Discrete Remote Holder with Honeycomb Sides with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Under-the-Table Discrete Remote Holder with Honeycomb Sides.